制造商: Analog Devices Inc.
產品種類: 監控電路
RoHS: 詳細信息
類型: Voltage Supervisory
安裝風格: SMD/SMT
封裝 / 箱體: SOT-143-4
閾值電壓: 2.93 V
被監測輸入數: 1 Input
輸出類型: Active Low
人工復位: Manual Reset
看門狗計時器: No Watchdog
電池備用開關: No Backup
重置延遲時間: 560 ms
電源電壓-最大: 5.5 V
最小工作溫度: - 40 C
最大工作溫度: + 85 C
準確性: 1.5 %
系列: ADM811
封裝: Reel
封裝: Cut Tape
封裝: MouseReel
商標: Analog Devices
芯片啟用信號: No Chip Enable
高度: 0.9 mm
長度: 2.9 mm
工作電源電流: 15 uA
過電壓閾值: 2.98 V
Pd-功率耗散: 200 mW
功率失效檢測: No
產品類型: Supervisory Circuits
3000
子類別: PMIC - Power Management ICs
電源電壓-最小: 1 V
欠電壓閾值: 2.88 V
寬度: 1.3 mm
單位重量: 10.300 mg
FEATURES Superior upgrade for MAX811/MAX812 Specified over temperature Low power consumption: 5 μA typical Precision voltage monitor: 2.5 V, 3 V, 3.3 V, 5 V options Reset assertion down to 1 VCC Power-on reset: 140 ms minimum Logic low RESET output (ADM811) Logic high RESET output (ADM812) Built-in manual reset APPLICATIONS Microprocessor systems Controllers Intelligent instruments Automotive systems Safety systems Portable instruments FUNCTIONAL BLOCK DIAGRAM RESET GENERATOR DEBOUNCE VREF RESET/RESET GND VCC MR ADM811/ADM812 00092-001 Figure 1. GENERAL DESCRIPTION The ADM811/ADM812 are reliable voltage monitoring devices suitable for use in most voltage monitoring applications. The ADM811/ADM812 are designed to monitor six different voltages, each allowing a 5% or 10% degradation of standard PSU voltages before a reset occurs. These voltages have been selected for the effective monitoring of 2.5 V, 3 V, 3.3 V, and 5 V supply voltage levels. Included in this circuit is a debounced manual reset input. Reset can be activated using an electrical switch (or an input from another digital device) or by a degradation of the supply voltage. The manual reset function is very useful, especially if the circuit in which the ADM811/ADM812 are operating enters