MLX90340 Melexis 板機接口移動感應(yīng)器和位置傳感器 全新原裝正品 全系列優(yōu)勢產(chǎn)品 歡迎來電咨詢??！
The MLX90340 is a monolithic sensor IC sensitive to the flux density applied orthogonally and parallel to the IC surface.
Top features
-
Triaxis® Hall technology
-
On-chip signal processing for robust absolute position sensing
-
ASIL-A capable, Safety Element out of Context (SEooC)
This unique sensing principle applied to a position sensor IC results into an impressive robustness of the position signal over the mechanical (airgap, off-axis) tolerances. The rotation of this horizontal component is sensed over a wide range (up to 360o) and processed by the on-chip digital signal processing (DSP) to ultimately report the absolute angular position of the end-of-shaft magnet.
Alternatively, through measuring individually the horizontal and vertical components, the MLX90340 is able to address linear stroke (displacement) position sensors and also absolute rotary position sensors with a through-shaft magnet. The MLX90340 reports either a ratiometric analog output or a pulse-width modulation (PWM) signal. From sensing and reporting perspectives, the MLX90340 is an extremely versatile IC for any stand-alone remote position sensor application.
The output transfer characteristic is fully programmable (e.g. offset, gain, clamping levels, linearity, thermal drift, filtering, range...) to match any specific requirement through end-of-line calibration. The Melexis programming unit communicates and calibrates the device exclusively through the connector terminals (Vdd-Vss-Out). Additionally, the MLX90340 is offered in four different factory-programmed analog versions compatible with 90o, 180o, 270o and 360o rotary end-of-shaft applications.
The MLX90340 targets and is used in a myriad of non-contacting linear and rotary position sensor applications which are frequently seen in consumer and industrial systems. The IC is available in single and dual redundant implementations to cost-effectively address the full range of applications.
The MLX90340 is offered as an ASIL-A SEooC (Safety Element out of Context - ISO 26262) component. The MLX90340 is pin-to-pin compatible with the previous generations of Triaxis® position sensor ICs:
-
Gen I:
-
Gen I:
-
Gen I:
-
Gen II:
-
Gen II ?:
-
Triaxis® Hall technology
-
On-chip signal processing for robust absolute position sensing
-
ASIL-A capable, Safety Element out of Context (SEooC)
-
Programmable measurement range
-
Programmable linear transfer characteristic (multi-points 4 or piece-wise-linear 17)
-
Selectable output mode: analog (ratiometric) and PWM
-
12-bit resolution
-
10-bit thermal accuracy
-
48-bit ID number option
-
Single die - SOIC-8 package RoHS compliant
-
Dual die (full redundant) - TSSOP-16 package RoHS compliant
-
Programmable with the and the PTC04-DB-90316 daughterboard