制造商: onsemi
產品種類: 低壓差穩壓器
RoHS: 詳細信息
安裝風格: Through Hole
封裝 / 箱體: TO-92-3
輸出電壓: 3.3 V
輸出電流: 100 mA
輸出端數量: 1 Output
極性: Positive
靜態電流: 75 uA
輸入電壓（最小值）: 2 V
輸入電壓（最大值）: 30 V
輸出類型: Fixed
最小工作溫度: - 40 C
最大工作溫度: + 125 C
回動電壓: 30 mV
系列: LP2950
封裝: Bulk
商標: onsemi
回動電壓—最大值: 80 mV at 100 uA
高度: 5.33 mm
Ib - 輸入偏流: 75 uA
長度: 5.2 mm
線路調整率: 0.1 %
負載調節: 0.1 %
產品類型: LDO Voltage Regulators
參考電壓: 1.25 V
2000
子類別: PMIC - Power Management ICs
電壓調節準確度: 0.5 %
寬度: 4.19 mm
單位重量: 453.600 mg
The LP2950 and LP2951 are micropower voltage regulators that are specifically designed to maintain proper regulation with an extremely low input?to?output voltage differential. These devices feature a very low quiescent bias current of 75 A and are capable of supplying output currents in excess of 100 mA. Internal current and thermal limiting protection is provided. The LP2951 has three additional features. The first is the Error Output that can be used to signal external circuitry of an out of regulation condition, or as a microprocessor power?on reset. The second feature allows the output voltage to be preset to 5.0 V, 3.3 V or 3.0 V output (depending on the version) or programmed from 1.25 V to 29 V. It consists of a pinned out resistor divider along with direct access to the Error Amplifier feedback input. The third feature is a Shutdown input that allows a logic level signal to turn?off or turn?on the regulator output. Due to the low input?to?output voltage differential and bias current specifications, these devices are ideally suited for battery powered computer, consumer, and industrial equipment where an extension of useful battery life is desirable. The LP2950 is available in the three pin case 29 and DPAK packages, and the LP2951 is available in the eight pin dual?in?line, SOIC?8 and Micro8 surface mount packages. The ‘A’ suffix devices feature an initial output voltage tolerance ±0.5%